Sharing your results - printing of publishing

Version 1.1 by Fredrik Lagerström on 2021/01/13 07:53

When you're done calculating a PRE-Stress project, the data can be published as a report. This is done through the Preview & Print functionality in the File menu. The printout can then be sent to any print-capable device recognized by your operating system, including fax utilities and pdf conversion tools.

As the calculation and dimensioning process generates a large volume of information, PRE-Stress allows you to filter the printout to contain the information most relevant to a given project.

printout_selection

The printout selection tab allows you to enable or disable various aspects of the printout. Each of these aspects are handled by their own tab, which allows for more precise printout configuration.

printout_geometry

This section determines which aspect(s) of the geometry data, if any, should be printed out.

printout_loads

This section determines which aspect(s) of the load-related data, if any, should be printed out.

The following sections similarly deal with their own aspects, but on an element- or load combination basis.

printout_selection_general

printout_selection_geometry2

printout_selection_loads2

printout_selection_concrete_input2

printout_selection_results_load_combinations2

printout_selection_results_joints2

printout_selection_design2

In addition, selecting File-> Print general overview will generate and print an overview report, which is a condensed summary of the project data

Copyright 2020 StruSoft AB
PRE-Stress Documentation