Sharing your results - printing of publishing

Version 16.1 by Fredrik Lagerström on 2021/01/13 08:46
Contents

When you're done calculating a PRE-Stress project, the data can be published as a report. This is done through the Preview & Print functionality in the File menu. The printout can then be sent to any print-capable device recognized by your operating system, including fax utilities and pdf conversion tools.

As the calculation and dimensioning process generates a large volume of information, PRE-Stress allows you to filter the printout to contain the information most relevant to a given project.

1610520959086-866.png

The printout selection tab allows you to enable or disable various aspects of the printout. Each of these aspects are handled by their own tab, which allows for more precise printout configuration.

1610520975221-515.png

This section determines which aspect(s) of the geometry data, if any, should be printed out.

1610520995914-100.png

This section determines which aspect(s) of the load-related data, if any, should be printed out.

The following sections similarly deal with their own aspects, but on an element- or load combination basis.

1610521015164-856.png

1610521111128-304.png

1610521126915-786.png

1610521165149-492.png

1610521184169-200.png

1610521197967-450.png

1610521211935-869.png

In addition, selecting File-> Print general overview will generate and print an overview report, which is a condensed summary of the project data