<
From version < 18.1 >
edited by Fredrik Lagerström
on 2021/01/13 09:04
To version < 19.1 >
edited by Fredrik Lagerström
on 2021/01/13 11:27
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -6,9 +6,9 @@
6 6  
7 7  (% id="cke_bm_480S" style="display:none" %) (%%)As the calculation and dimensioning process generates a large volume of information, PRE-Stress allows you to filter the printout to contain the information most relevant to a given project.
8 8  
9 -== Printout options ==
9 += Printout options =
10 10  
11 -=== Settings for beams ===
11 +== Settings for beams ==
12 12  
13 13  [[image:1610523934439-194.png]]
14 14  
... ... @@ -31,6 +31,8 @@
31 31  ** Explanation
32 32  * Recess beam
33 33  
34 +== Settings for load combinations ==
35 +
34 34  [[image:1610523967065-192.png]]
35 35  
36 36  Each load combination also has individual settings. these might be dependant on what type of element that is being calculated, if topping is present, if it is subjected to torsion or if a punching check can be performed (hollowcore elements with point loads)
... ... @@ -58,14 +58,29 @@
58 58  * Deformation
59 59  * Torsion
60 60  
63 += Print general overview =
61 61  
65 +The Print general overview is the most simple way to get an overview of the most basic of the results.
62 62  
67 +* Overview of the element
68 +** Mark
69 +** Length
70 +** Width
71 +** Height
72 +** Span
73 +** Strand pattern
74 +* Section
75 +* Cables (diameter)
76 +* VRd - Shear capacity of the cross section
77 +* Vd - Shear force due to loads
78 +* Vd / VRd - Utilization of Shear force [unitless]
79 +* MRd - Moment capacity
80 +* Md - Moment due to load
81 +* Md / MRd - Utilization of Moment [unitless]
82 +* Comp.Zone - Height of the compression zone
83 +* Cable stress - Prestressing in the cables
84 +* Warnings and information - Additional information from the calculation
63 63  
86 +[[image:1610525053446-157.png]]
64 64  
65 -
66 -
67 -
68 -
69 -
70 -
71 71  In addition, selecting File-> Print general overview will generate and print an overview report, which is a condensed summary of the project data
Copyright 2020 StruSoft AB
PRE-Stress Documentation