The following section follows EN 1992-1-2 3.2.3 of the Danish National Annex.

The reinforcement material parameter depends on the temperature as shown in the tables below. The parameter factors are given by the specific table in interpolated form.

Manufacturing +Q (Hot rolled)

Temperature

Espfspf0.2f2.0
201.001.001.001.00
1001.001.000.961.00
2000.900.810.881.00
3000.800.610.771.00
4000.700.420.651.00
5000.600.360.470.78
6000.310.180.270.47
7000.130.070.130.23
8000.090.050.050.11
9000.070.040.040.06
10000.040.020.020.04
11000.020.010.010.02
12000.000.000.000.00

Manufacturing +AC (Quenched)

The values corresponding to +Q are used for fsp, to a maximum of f0.2.

Temperature

Esp

fsp 

(no values in standard)

f0.2f2.0
201.001.001.001.00
1001.001.000.981.00
2001.000.810.941.00
3000.990.610.890.99
4000.960.420.780.95
5000.790.360.550.79
6000.480.180.270.47
7000.210.070.100.17
8000.080.000.000.00
9000.030.000.000.00
10000.010.000.000.00
11000.010.000.000.00
12000.000.000.000.00

Manufacturing +C (Cold Worked)

Temperature

Espfspf0.2f2.0
201.001.001.001.00
1001.000.960.991.00
2000.870.920.951.00
3000.720.810.891.00
4000.560.630.780.94
5000.400.440.570.67
6000.240.260.300.40
7000.080.080.120.12
8000.060.060.050.11
9000.050.050.020.08
10000.030.030.010.05
11000.020.020.000.03
12000.000.000.000.00

No given manufacturing method (Minimum of +Q and +C)

Temperature

Espfspf0.2f2.0
201.001.001.001.00
1001.000.960.961.00
2000.870.810.881.00
3000.720.610.771.00
4000.560.420.650.94
5000.400.360.470.67
6000.240.180.270.40
7000.080.070.120.12
8000.060.050.050.11
9000.050.040.020.06
10000.030.020.010.04
11000.020.010.000.02
12000.000.000.000.00

No given manufacturing method (Minimum of +Q and +C and +AC)

Temperature

Espfspf0.2f2.0
201.001.001.001.00
1001.000.960.961.00
2000.870.810.881.00
3000.720.610.770.99
4000.560.420.650.94
5000.400.360.470.67
6000.240.180.270.40
7000.080.070.100.12
8000.060.000.000.00
9000.030.000.000.00
10000.010.000.000.00
11000.010.000.000.00
12000.000.000.000.00

1591780285271-250.png

Copyright 2020 StruSoft AB
PRE-Stress Documentation